--- title: "Traffic engineering; road users and vehicular characteristics" subject: "Transportation Engineering II" chapter: 1 key: "semester_7/transportation_engineering_ii:te-definition-road-users-vehicular" source: https://www.bctengineer.com/q/semester_7/transportation_engineering_ii/te-definition-road-users-vehicular site: BCT Engineering --- # Traffic engineering; road users and vehicular characteristics Transportation Engineering II · Chapter 1: Traffic Engineering - Asked in: 2071 Chaitra, 8 marks - Video: [Traffic Characteristics - Traffic Engineering - GATE Transportation Engineering](https://www.youtube.com/watch?v=gvgwYeXyn_U) — Ekeeda GATE & ESE - Answer checked by Claude Opus 5.5 (high effort) on 2026-10-14 - Page: https://www.bctengineer.com/q/semester_7/transportation_engineering_ii/te-definition-road-users-vehicular - Whole chapter: https://www.bctengineer.com/md/semester_7/transportation_engineering_ii/chapter-1 ## Question Define traffic engineering. Describe road users and vehicular characteristics. ## Short answer Traffic engineering plans, designs, and operates road systems for safe, efficient movement. Road users have physical and mental traits, including a PIEV reaction time of about 2.5 s and pedestrian walking speed of 1.2 m/s. Vehicular characteristics involve static dimensions (width 2.5 m, height 4.75 m, length up to 18 m, axle loads) and dynamic performance affecting alignment and capacity. ## Answer #### Traffic engineering **Traffic engineering** is the branch of transportation engineering that deals with the planning, geometric design, operation and control of roads, their networks, terminals and adjacent land use, so that people and goods move safely, quickly, comfortably, economically and with least harm to the environment. (Institute of Transportation Engineers definition, as used in Khanna and Justo.) Its scope covers traffic characteristics, traffic studies (volume, speed, O-D, parking, accident), traffic regulation and control, geometric design, traffic signs, markings and signals, road lighting, and traffic planning and management, including the Nepal Motor Vehicles and Transport Management Act and the Department of Roads (DoR) rules for enforcement. #### Road users 1. **Physical:** vision (acuity, field of vision, colour vision, glare), hearing, strength and agility. They fix sign sizes, letter heights, lighting, sight distances and footpath gradients. 2. **Mental and psychological:** attention, judgement, emotional stability and attitude. They influence overtaking decisions, gap acceptance and compliance with signals. 3. **Reaction time (PIEV):** about 2.5 s is used for stopping sight distance, headlight sight distance and intersection sight distance (IRC:SP:23, IRC:66, Nepal Road Standard 2070). 4. **Pedestrian characteristics:** walking speed about 1.2 m/s (IRC:103 and IRC:93 use 1.2 m/s; slower, about 0.9 m/s, for children and the elderly); space needed about 0.5-0.75 m² per person; they need footpaths, crossings, refuge islands and signal time. 5. **Cyclists:** speed 10-25 km/h; they need separate lanes and safe turning at intersections. 6. **Age and gender, fatigue, intoxication and disability:** these add to variation, so design uses the 85th-percentile or a conservative value (for example the 15th-percentile pedestrian speed for crossing time). 7. **Behaviour and compliance:** lane discipline, helmet and seat-belt use, jaywalking and parking habits vary by country and must be reflected in the design and enforcement plan. 8. **Mixed traffic:** in Nepal slow and fast vehicles share the carriageway, so wider shoulders and segregation are required. #### Vehicular characteristics **Static characteristics** | Characteristic | Typical value | Effect on road design | |---|---|---| | Width | 2.5 m (trucks, buses) | Lane width (3.5 m rural, 3.0-3.25 m urban), parking bay width | | Height | up to 4.75 m (IRC) | Vertical clearance under bridges and tunnels (5.5 m minimum, IRC:5) | | Length | 11-12 m rigid, up to 18 m semi-trailer | Parking bays, curve widening, kerb radius, passing and storage lanes | | Wheel base and overhang | 6-7 m (truck) | Extra widening on curves, minimum turning radius, tail swing | | Ground clearance | 0.2-0.3 m | Hump, drain and vertical-curve design | | Turning radius | 12-14 m (truck) | Minimum intersection radius, island and median-opening design | | Weight and axle load | 10.2 t legal single axle; 8.16 t standard axle in IRC:37 | Pavement thickness, bridge loading (IRC:6), width of bridge | | Eye and object height | driver eye 1.2 m, object 0.15 m (IRC:SP:23) | Sight distance at crests | Examples: the 2.5 m width and 11 m length of a bus fix the minimum bay size; the 4.75 m height fixes bridge clearance; the large turning radius of trucks fixes the radius of intersection corners; the axle load fixes pavement thickness. **Dynamic characteristics** - **Power and performance:** engine power, tractive effort and weight-to-power ratio decide acceleration, gradient ability and the need for climbing lanes. - **Speed and acceleration:** the typical range of speeds and accelerations fixes overtaking sight distance, the length of acceleration/deceleration lanes and signal timings. - **Braking and braking efficiency:** deceleration depends on tyre-pavement friction (f about 0.35-0.40); it fixes stopping sight distance. - **Resistances:** air, rolling, grade and curve resistance decide fuel use and the speed on gradients. - **Turning and stability:** centrifugal force limits speed on curves, so superelevation and an adequate radius are provided; vehicles with a high centre of gravity may overturn. - **Headlight range and visibility:** fix night sight distance and vertical-curve length. - **Vehicle mix:** the share of heavy vehicles sets the PCU factors (IRC:64-1990 for rural roads: car 1.0, bus/truck 3.0, motor cycle 0.5, bicycle 0.5, cycle rickshaw 2.0, horse-drawn vehicle 4.0, bullock cart 8.0). ## Check yourself The answer's key points as multiple-choice questions, with the correct option and why. 1. What does the maximum vehicle height of about 4.75 m govern? A. Lane width B. Vertical clearance under bridges and tunnels (5.5 m minimum) C. Pavement thickness D. Superelevation Answer: B. Vehicle height fixes the vertical clearance provided under structures. (Key point: Vehicle height and clearance) 2. What does the large turning radius of trucks fix? A. The pavement thickness B. The sight distance on crests C. The height of bridge clearance D. The radius of intersection corners and median openings Answer: D. Minimum intersection radius, islands and median openings depend on the vehicle turning radius. (Key point: Turning radius) 3. Which design element is fixed by axle load? A. Pavement thickness and bridge loading B. Lane width C. Parking bay length D. Curve widening Answer: A. Axle load and weight govern pavement thickness (standard axle 8.16 t in IRC:37) and bridge loads. (Key point: Axle load) 4. Which set of PCU factors matches IRC:106-1990? A. Car 3, bus 1, bicycle 2 B. Car 1.0, bus/truck 3.0, motor cycle 0.5, bicycle 0.5 C. Car 1.0, bus 0.5, truck 0.5 D. Car 1.0, bullock cart 1.0, bicycle 2.0 Answer: B. Cars are 1.0, buses and trucks 3.0, motor cycles and bicycles 0.5 under IRC:106-1990. (Key point: PCU values) 5. Which vehicle characteristic fixes stopping sight distance? A. Ground clearance B. Vehicle width C. Braking efficiency and tyre-pavement friction (f about 0.35-0.40) D. Vehicle colour Answer: C. Deceleration depends on friction, which sets the braking distance in stopping sight distance. (Key point: Braking and friction) ## Related in Transportation Engineering II - [Traffic engineering; road user characteristics and HVE](https://www.bctengineer.com/question.md?key=semester_7%2Ftransportation_engineering_ii%3Ate-definition-road-user-hve) — Transportation Engineering II, chapter 1 - [Vehicular characteristics influencing traffic performance](https://www.bctengineer.com/question.md?key=semester_7%2Ftransportation_engineering_ii%3Avehicular-characteristics-traffic-performance) — Transportation Engineering II, chapter 1 - [Night visibility, road marking, traffic islands](https://www.bctengineer.com/question.md?key=semester_7%2Ftransportation_engineering_ii%3Anight-visibility-road-marking-traffic-island) — Transportation Engineering II, chapter 1 - [Critical road user and static vehicle characteristics](https://www.bctengineer.com/question.md?key=semester_7%2Ftransportation_engineering_ii%3Aroad-user-static-vehicle-characteristics) — Transportation Engineering II, chapter 1 - [Road user characteristics and their importance](https://www.bctengineer.com/question.md?key=semester_7%2Ftransportation_engineering_ii%3Aroad-user-characteristics-importance) — Transportation Engineering II, chapter 1 - [Driver vision characteristics affecting traffic](https://www.bctengineer.com/question.md?key=semester_7%2Ftransportation_engineering_ii%3Adriver-vision-characteristics) — Transportation Engineering II, chapter 1 ## Related in other subjects - [Short note: Telephone traffic engineering](https://www.bctengineer.com/question.md?key=semester_8%2Ftelecommunications%3Ashort-note-traffic-engineering) — Telecommunications, chapter 6, asked 2× - [Traffic engineering objectives; Engset formula](https://www.bctengineer.com/question.md?key=semester_8%2Ftelecommunications%3Atraffic-objectives-engset) — Telecommunications, chapter 6 - [Traffic engineering goals; E.600 busy hours](https://www.bctengineer.com/question.md?key=semester_8%2Ftelecommunications%3Atraffic-engineering-busy-hour-e600) — Telecommunications, chapter 6 - [Role of traffic engineering](https://www.bctengineer.com/question.md?key=semester_8%2Ftelecommunications%3Arole-of-traffic-engineering) — Telecommunications, chapter 6