- Asked 4/26
- 2082 Baisakh · 3+4+2 marks
Butterworth characteristics and order (0.5 dB, 20 dB)
Short answer
Butterworth response is maximally flat, monotonic, with 20n dB/decade roll-off and all poles on a circle. The order is n ≥ log₁₀((10^(0.1αmin)-1)/(10^(0.1αmax)-1)) / (2 log₁₀(ωs/ωp)). For ωp=1000 rad/s, αmax=0.5 dB, ωs=2000 rad/s, αmin=20 dB, n ≥ 4.832, so required order is 5.
What are the characteristics of Butterworth response? Derive an expression to estimate the order (n) of low pass Butterworth approximation. Use the expression to estimate the order of Butterworth filter with the following specifications: ωp = 1,000 rad/sec; αmax = 0.5 dB; ωs = 2,000 rad/sec; αmin = 20 dB
Characteristics of the Butterworth response
The Butterworth (maximally flat) low-pass response has magnitude
(normalized so that = 1 rad/s; with the half-power frequency is 1 rad/s). Its characteristics are:
- Maximally flat at : the first derivatives of are zero at , so the passband is as flat as possible.
- Monotonic: no ripple in the passband or the stopband; the gain falls continuously with frequency.
- ; at (when ) (−3 dB) for every order.
- Roll-off of dB/decade far into the stopband; the transition is wider than Chebyshev or elliptic for the same .
- All-pole function: all transmission zeros are at .
- Poles lie on a circle of radius in the left-half s-plane, equally spaced by , symmetric about the real axis.
- Phase is fairly linear (better than Chebyshev), with a moderate delay peak near the cut-off.
- As the response approaches the ideal brick-wall.
|T|
1 |----.__
| `. n = 2
0.707 - - - - :\. n = 4
| : \ \.
| : `. `-._
+---------+---------`----> w
1
Order of a Butterworth low-pass filter
For the normalized Butterworth response (passband edge = 1 rad/s)
Passband condition (, ):
Stopband condition (at the attenuation must be at least ):
Taking logarithms:
is rounded up to the next integer.
Order for the given specifications
= 1000 rad/s, = 0.5 dB, = 2000 rad/s, = 20 dB.
The order must be an integer, so n = 5.
Check: with , , attenuation at is dB dB.
Answer: order .
✓ Answer checked by Claude Sonnet 5.5
Related questions
- Butterworth characteristics and order (1 dB, 12 dB) · Filter Design, chapter 2 · asked 4×
- Butterworth characteristics and order (1 dB, 20 dB) · Filter Design, chapter 2 · asked 4×
- Butterworth order (0.5 dB, 22 dB) · Filter Design, chapter 2 · asked 4×
- FDNR 4th order Butterworth LPF at 20,000 rad/s · Filter Design, chapter 8
- Butterworth order (0.1 dB to 200 rad/s, 30 dB) · Filter Design, chapter 2 · asked 2×
- Chebyshev order (0.5 dB, 20 dB, 3500 rad/s) · Filter Design, chapter 2
- Chebyshev order (0.1 dB, 20 dB, 2500 rad/s) · Filter Design, chapter 2 · asked 5×
- Chebyshev characteristics and order (1500/4500 rad/s) · Filter Design, chapter 2 · asked 2×
- Chebyshev order (0.25 dB, 20 dB, 1500 rad/s) · Filter Design, chapter 2 · asked 6×
- Matched filter approximation using RC low pass filter · Communication Systems, chapter 9 · asked 2×
- Impulse response of ideal low pass filter · Signals and Systems, chapter 5 · asked 5×
- Impulse response of DT ideal low pass filter · Signals and Systems, chapter 6