Skip to main content

Inverse Chebyshev order (0.5 dB, 18 dB, 1800 rad/s)

Short answer

Order n ≥ cosh⁻¹√((10^(0.1αmin)−1)/(10^(0.1αmax)−1)) / cosh⁻¹(ωs/ωp). For αmax=0.5 dB, αmin=18 dB, ωp=1000 rad/s, ωs=1800 rad/s, ωs/ωp=1.8 gives n ≥ 3.193, so n = 4.

Derive an expression to calculate the order of Inverse Chebyshev approximation for lowpass filter specifications. Calculate the order of Inverse Chebyshev filter for following specifications of a lowpass filter: αmax = 0.5 dB, αmin = 18 dB, ωp = 1000 rad/s, ωs = 1800 rad/s

Derivation

The inverse Chebyshev (Chebyshev Type II) response, normalized to the stopband edge (Ω=ω/ωs\Omega = \omega/\omega_s, stopband begins at Ω=1\Omega=1), is

∣T(jΩ)∣2=ε2Cn2(1/Ω)1+ε2Cn2(1/Ω)|T(j\Omega)|^2 = \frac{\varepsilon^2 C_n^2(1/\Omega)}{1+\varepsilon^2 C_n^2(1/\Omega)}

It is obtained by taking a Chebyshev response, subtracting it from 1 (turning it into a high-pass with equiripple stopband) and replacing Ω\Omega by 1/Ω1/\Omega.

Step 1: stopband edge. At Ω=1\Omega = 1, Cn(1)=1C_n(1) = 1:

αmin=10log⁡10(1+1ε2)  ⇒  ε2=1100.1αmin−1\alpha_{min} = 10\log_{10}\left(1+\frac{1}{\varepsilon^2}\right) \;\Rightarrow\; \varepsilon^2 = \frac{1}{10^{0.1\alpha_{min}}-1}

Step 2: passband edge. At Ωp=ωp/ωs\Omega_p = \omega_p/\omega_s, 1/Ωp=ωs/ωp>11/\Omega_p = \omega_s/\omega_p > 1, and the attenuation must not exceed αmax\alpha_{max}:

αmax≥10log⁡10(1+1ε2Cn2(ωs/ωp))  ⇒  Cn2 ⁣(ωsωp)≥1ε2(100.1αmax−1)=100.1αmin−1100.1αmax−1\alpha_{max} \ge 10\log_{10}\left(1+\frac{1}{\varepsilon^2 C_n^2(\omega_s/\omega_p)}\right) \;\Rightarrow\; C_n^2\!\left(\frac{\omega_s}{\omega_p}\right) \ge \frac{1}{\varepsilon^2(10^{0.1\alpha_{max}}-1)} = \frac{10^{0.1\alpha_{min}}-1}{10^{0.1\alpha_{max}}-1}

Step 3: solve. With Cn(x)=cosh⁡(ncosh⁡−1x)C_n(x) = \cosh(n\cosh^{-1}x) for x>1x>1:

n≥cosh⁡−1100.1αmin−1100.1αmax−1cosh⁡−1(ωsωp)n \ge \frac{\cosh^{-1}\sqrt{\dfrac{10^{0.1\alpha_{min}}-1}{10^{0.1\alpha_{max}}-1}}}{\cosh^{-1}\left(\dfrac{\omega_s}{\omega_p}\right)}

This is the same expression as for the Chebyshev filter: for the same specification both need the same order.

Order for the given specification

αmax=0.5\alpha_{max} = 0.5 dB, αmin=18\alpha_{min} = 18 dB, ωp=1000\omega_p = 1000 rad/s, ωs=1800\omega_s = 1800 rad/s.

100.05−1=0.12202101.8−1=62.095762.0957/0.12202=22.559,cosh⁡−1(22.559)=3.8088cosh⁡−1(1.8)=1.1929n≥3.80881.1929=3.193\begin{aligned} 10^{0.05}-1 &= 0.12202 \\ 10^{1.8}-1 &= 62.0957 \\ \sqrt{62.0957/0.12202} &= 22.559, \quad \cosh^{-1}(22.559) = 3.8088 \\ \cosh^{-1}(1.8) &= 1.1929 \\ n &\ge \frac{3.8088}{1.1929} = 3.193 \end{aligned}

Answer: n = 4. (A Butterworth filter would need n=6n = 6 for the same specification.)

✓ Answer checked by Claude Sonnet 5.5

All Filter Design chapter 2 questions →