- Asked 7/26
- 2075 Asoj · 1+4 marks
Sensitivity of -3; ωo of Sallen-Key LPF
Short answer
A sensitivity of -3 means a 1% increase in y causes approximately a 3% decrease in x, indicating amplified opposite-direction change. For the Sallen-Key ωo, sensitivity with respect to R1, R2, C1, C2 is -1/2 each; RA and RB (gain resistors) have zero sensitivity.
What information do you get when sensitivity of x with respect to y is -3? Perform sensitivity analysis for ωo of Sallen Key low pass filter with respect to all the resistors and capacitors present in the circuit.
Meaning of
A 1% increase in causes about a 3% decrease in ; the minus sign means moves opposite to . Since , the change is amplified three times, so is fairly sensitive to .
Sensitivity of of the Sallen-Key low-pass filter
Sallen-Key low-pass biquad (gain ):
C1
+-----||-------------+
| |
Vin -R1-+-(A)- R2 -+-(B)--|+\ |
| | >+---- Vo
=== C2 +|-/ |
| | |
GND +-RB-+
RA
|
GND
Its transfer function is
so
Sensitivity with respect to :
In the same way:
does not contain , or , so
| Element | |
|---|---|
| , | −1/2 each |
| , | −1/2 each |
| , (gain) | 0 |
So a 1% increase in any one R or C lowers by about 0.5%; if all four increase by 1%, falls by about 2%. (The Q of the Sallen-Key circuit is more sensitive: for the equal-element design , which grows with Q.)
✓ Answer checked by Claude Sonnet 5.5
Related questions
- Sensitivity of -5; ωo of Sallen-Key LPF · Filter Design, chapter 7 · asked 4×
- Sensitivity of 10; ωo of Sallen-Key LPF · Filter Design, chapter 7 · asked 3×
- Sensitivity of 0.1; ωo of Tow-Thomas LPF · Filter Design, chapter 7 · asked 4×
- Importance of sensitivity; ωo of Sallen-Key LPF · Filter Design, chapter 7 · asked 13×
- Define sensitivity; ωo sensitivity of Sallen-Key LPF · Filter Design, chapter 7 · asked 7×
- Sensitivity of 2; centre frequency of Sallen-Key LPF · Filter Design, chapter 7
- Signal parameter sensitivity; ωo of Sallen-Key · Filter Design, chapter 7
- Sensitivity analysis of Tow-Thomas LPF · Filter Design, chapter 7 · asked 8×
- Sallen-Key 2nd order Butterworth LPF at 10 kHz · Filter Design, chapter 6
- Sallen-Key LPF for 1/(s²+0.765s+1) · Filter Design, chapter 6 · asked 3×
- RC low pass filter operation · Basic Electronics Engineering, chapter 1 · asked 5×
- Impulse response of ideal low pass filter · Signals and Systems, chapter 5 · asked 5×
- Matched filter approximation using RC low pass filter · Communication Systems, chapter 9 · asked 2×
- Transfer function of RC low-pass filter · Signals and Systems, chapter 5 · asked 2×