Skip to main content

Optimum detector impulse response in additive white noise

Short answer

An optimum detector minimizes error probability by maximizing the output SNR. In AWGN, it is the matched filter with impulse response h(t)=k s(T−t), a time-reversed and delayed version of the transmitted pulse. The maximum SNR at the sampling instant is 2E/N_0.

What do you mean by optimum detector? Find the impulse response of optimum detector in the presence of additive white noise.

Optimum detector

An optimum detector is a receiver (filter followed by sampler and threshold device) that makes the decision with the minimum probability of error. For a known pulse in additive white Gaussian noise, this is achieved by the filter that maximises the output signal-to-noise ratio at the sampling instant; this optimum filter is the matched filter.

Impulse response of the optimum detector in additive white noise

Set-up. The received signal is x(t)=s(t)+w(t)x(t)=s(t)+w(t), 0≤t≤T0\le t\le T, where s(t)s(t) is a known pulse and w(t)w(t) is white noise of two-sided PSD N0/2N_0/2. It passes through an LTI filter h(t)↔H(f)h(t)\leftrightarrow H(f) and is sampled at t=Tt=T:

 s(t)+w(t)    +--------+   y(t)    sample     y(T)
 ------------>|  h(t)  |---------->--/ ---->  decision
              +--------+           at t=T

Output y(t)=so(t)+no(t)y(t)=s_o(t)+n_o(t) with

so(T)=∫−∞∞H(f)S(f)ej2πfTdf,E[no2]=N02∫−∞∞∣H(f)∣2dfs_o(T)=\int_{-\infty}^{\infty}H(f)S(f)e^{j2\pi fT}df,\qquad E[n_o^2]=\frac{N_0}{2}\int_{-\infty}^{\infty}\lvert H(f)\rvert^2df

We want H(f)H(f) that maximises the output peak signal-to-noise ratio

η=∣so(T)∣2E[no2]=∣∫H(f)S(f)ej2πfTdf∣2N02∫∣H(f)∣2df\eta=\frac{\lvert s_o(T)\rvert^2}{E[n_o^2]}=\frac{\left\lvert\int H(f)S(f)e^{j2\pi fT}df\right\rvert^2}{\frac{N_0}{2}\int\lvert H(f)\rvert^2df}

Schwarz inequality: ∣∫ϕ1ϕ2 df∣2≤∫∣ϕ1∣2df∫∣ϕ2∣2df\left\lvert\int\phi_1\phi_2\,df\right\rvert^2\le\int\lvert\phi_1\rvert^2df\int\lvert\phi_2\rvert^2df, with equality only when ϕ1(f)=k ϕ2∗(f)\phi_1(f)=k\,\phi_2^*(f). Put ϕ1=H(f)\phi_1=H(f) and ϕ2=S(f)ej2πfT\phi_2=S(f)e^{j2\pi fT}:

η≤∫∣H∣2df∫∣S∣2dfN02∫∣H∣2df=2N0∫−∞∞∣S(f)∣2df=2EN0\eta\le\frac{\int\lvert H\rvert^2df\int\lvert S\rvert^2df}{\frac{N_0}{2}\int\lvert H\rvert^2df}=\frac{2}{N_0}\int_{-\infty}^{\infty}\lvert S(f)\rvert^2df=\frac{2E}{N_0}

(using Rayleigh's theorem, EE = pulse energy). The maximum is reached when

Hopt(f)=k S∗(f) e−j2πfTH_{opt}(f)=k\,S^*(f)\,e^{-j2\pi fT}

Impulse response. Take the inverse transform. For real s(t)s(t), S∗(f)=S(−f)S^*(f)=S(-f), which is the transform of s(−t)s(-t); the factor e−j2πfTe^{-j2\pi fT} is a delay of TT:

hopt(t)=k∫−∞∞S∗(f)e−j2πfTej2πftdf=k∫−∞∞S(−f)e−j2πf(T−t)df=k s(T−t)\begin{aligned} h_{opt}(t) &= k\int_{-\infty}^{\infty}S^*(f)e^{-j2\pi fT}e^{j2\pi ft}df \\ &= k\int_{-\infty}^{\infty}S(-f)e^{-j2\pi f(T-t)}df \\ &= k\,s(T-t) \end{aligned}

So the optimum (matched) filter impulse response is the input pulse reversed in time and delayed by TT. Choosing the sampling instant TT equal to the pulse duration makes h(t)h(t) causal.

   s(t)                      h(t) = s(T - t)
    |\                          /|
    | \                        / |
    |  \                      /  |
 ---+---+---> t          ---+---+---> t
    0   T                   0   T

Results: maximum SNR =2E/N0=2E/N_0 depends only on pulse energy, not on pulse shape; the filter's frequency response is the conjugate of the pulse spectrum, so it passes strongly the frequencies where the signal is strong.

✓ Answer checked by Claude Opus 5.5 (high effort)

All Communication Systems chapter 9 questions →