- Asked 2/26
- 2076 Asoj · 2+5+3 marks
Chebyshev characteristics and order (0.25 dB, 40 dB)
Short answer
Chebyshev filter has equiripple passband, monotonic stopband, -20n dB/dec roll-off, and lower order than Butterworth. The order is n ≥ arcosh(√[(10^(0.1αmin)-1)/(10^(0.1αmax)-1)]) / arcosh(ωs/ωp). For αmax=0.25 dB, αmin=40 dB, ωs/ωp=2.5, n=5.
What are the characteristics of Chebyshev filter? Derive an expression to calculate the order of given low pass specifications using Chebyshev approximation. Using your expression calculate the order of Chebyshev low pass filter for following specifications: Passband extending from ω = 0 rad/s to ω = 1000 rad/s, the attenuation should not exceed 0.25 dB. Stopband extending from ω = 2500 rad/s to ω = ∞, the attenuation should not be less than 40 dB.
Characteristics of the Chebyshev filter
- Equiripple passband: oscillates between and in ; the ripple height is dB and is set by .
- Number of ripples: the passband contains half-cycles of ripple between and , so a higher order gives more ripples (of the same height).
- DC value: for odd and for even .
- Monotonic stopband: beyond the response falls monotonically; the asymptotic roll-off is dB/decade, but the transition is much sharper than Butterworth of the same order (about dB more stopband attenuation for the same ).
- All-pole function: no finite transmission zeros; poles lie on an ellipse in the s-plane.
- Phase/delay: phase is more non-linear and group delay has a larger peak near the band edge than Butterworth (poorer transient response, more ringing).
- For a given specification it needs a lower order than Butterworth, so fewer components.
Derivation of the order
The Chebyshev low-pass magnitude response (normalized so that the passband edge is ) is
where is the Chebyshev polynomial of order :
The attenuation in dB is .
Step 1: ripple factor from the passband edge. At , for every , so the attenuation is exactly :
Step 2: stopband condition. At the attenuation must be at least :
Step 3: solve for n. Since , :
The order is the next whole number above this value. (Useful identity: .)
Order for the given specification
Passband to rad/s with dB; stopband from rad/s with dB.
Answer: n = 5.
✓ Answer checked by Claude Sonnet 5.5
Related questions
- Butterworth order (0.1 dB to 200 rad/s, 30 dB) · Filter Design, chapter 2 · asked 2×
- Chebyshev order (0.1 dB, 20 dB, 2500 rad/s) · Filter Design, chapter 2 · asked 5×
- Inverse Chebyshev order (0.5 dB, 25 dB, 1800 rad/s) · Filter Design, chapter 2 · asked 5×
- Inverse Chebyshev order (0.25 dB, 18 dB, 1400 rad/s) · Filter Design, chapter 2 · asked 5×
- Chebyshev order (0.25 dB, 18 dB, 1650 rad/s) · Filter Design, chapter 2 · asked 2×
- Chebyshev order (0.25 dB, 20 dB, 1500 rad/s) · Filter Design, chapter 2 · asked 6×
- Inverse Chebyshev order (0.5 dB, 18 dB, 1800 rad/s) · Filter Design, chapter 2 · asked 3×
- Low-pass FIR window design, αs = 40 dB · Digital Signal Analysis and Processing, chapter 5 · asked 2×
- Bilinear Butterworth, 0.25π passband, −15 dB at 0.45π · Digital Signal Analysis and Processing, chapter 6 · asked 3×
- Matched filter approximation using RC low pass filter · Communication Systems, chapter 9 · asked 2×
- Low-pass FIR window design, αs = 41 dB · Digital Signal Analysis and Processing, chapter 5