- 2073 Shrawan · 2 marks
Guidelines for drawing flowchart
Short answer
Use standard symbols, a single Start and Stop, top‑to‑bottom flow with arrows, clear brief labels, no crossing lines, one operation per box, and verify with sample data.
Write down the guidelines to be followed to draw a flowchart.
Follow these guidelines when drawing a flowchart:
- Use only the standard symbols (oval for start/stop, parallelogram for input/output, rectangle for process, diamond for decision).
- Every flowchart has exactly one Start and one Stop.
- Flow goes from top to bottom and left to right, shown with arrows; flow lines should not cross.
- Each symbol has a short, clear text; a decision symbol has one entry and two labelled exits (Yes/No).
- Do not put detailed code in the symbols; keep one operation in one box.
- Use connectors for a long chart and label them clearly.
- Keep the chart simple, neat and on one page where possible, and verify it with sample data.
✓ Answer checked by Claude Opus 5.5 (high effort)
Related questions
- Pavement design factors; IRC rigid design steps · Transportation Engineering II, chapter 2 · asked 2×
- Sequence of steps when interrupt occurs · Microprocessor, chapter 5 · asked 2×
- Vertical curve 180 m, -3.5% then +4.5%, IP 2450 · Surveying II, chapter 6 · asked 2×
- Vertical curve 180 m, -4.5% then +3.5%, IP 450 · Surveying II, chapter 6 · asked 2×