GIC 4th order Butterworth HPF at 16,000 rad/s

A generalized impedance converter (GIC) is an active two-port, usually Antoniou's two-op-amp, five-impedance circuit. Its input impedance is the load impedance $Z_5$ multiplied by a conversion function $k(s) = Z_1Z_3/(Z_2Z_4)$. By choosing which positions hold capacitors, a GIC can make an inductor or an FDNR from only R, C and op-amps.

Simulating a grounded inductor with a GIC

   Iin  node 1
 o-->-----+--------------(+) A1
 Vin      |
         [Z1]
          +--- node 2 ---- output of A1
         [Z2]
          +--- node 3 ---- (-) A1 and (+) A2
         [Z3]
          +--- node 4 ---- output of A2
         [Z4]
          +--- node 5 ---- (-) A2
         [Z5]
          |
         GND

Each op-amp has negative feedback (A1 through $Z_2$, A2 through $Z_4$). With ideal op-amps the two input terminals of each op-amp are at the same voltage and draw no current, so $V_1 = V_3 = V_5 = V_{in}$.

$$\begin{aligned} \text{Node 5: } & \frac{V_4 - V_{in}}{Z_4} = \frac{V_{in}}{Z_5} \;\Rightarrow\; V_4 = V_{in}\left(1 + \frac{Z_4}{Z_5}\right) \\ \text{Node 3: } & \frac{V_2 - V_{in}}{Z_2} = \frac{V_{in} - V_4}{Z_3} = -\frac{Z_4}{Z_3 Z_5}V_{in} \;\Rightarrow\; V_2 = V_{in}\left(1 - \frac{Z_2 Z_4}{Z_3 Z_5}\right) \\ \text{Node 1: } & I_{in} = \frac{V_{in} - V_2}{Z_1} = \frac{Z_2 Z_4}{Z_1 Z_3 Z_5}V_{in} \end{aligned}$$ $$Z_{in} = \frac{V_{in}}{I_{in}} = \frac{Z_1 Z_3 Z_5}{Z_2 Z_4}$$

Put a capacitor in position 4 ($Z_4 = 1/sC$) and resistors elsewhere:

$$Z_{in} = \frac{R_1 R_3 R_5}{R_2}\, sC = sL, \qquad L = \frac{C R_1 R_3 R_5}{R_2}$$

With all resistors equal to $R$: $L = CR^2$. One end of this inductor is ground, so it replaces a grounded (shunt) inductor.

Design

Step 1: Lowpass prototype (table, n = 4): series $L_1 = 0.7654$ H, shunt $C_2 = 1.848$ F, series $L_3 = 1.848$ H, shunt $C_4 = 0.7654$ F, 1 Ω terminations.

Step 2: LP to HP transformation ($s \to 1/s$): each series L becomes a series capacitor $1/L$, each shunt C becomes a shunt (grounded) inductor $1/C$:

Step 3: Scaling (both inductors are grounded, so they are simulated by GICs).

Frequency scale to $\omega_0 = 16{,}000\ \text{rad/s}$ and impedance scale by $k_z$ (chosen as $10^4$):

$$R_{new} = k_z R, \qquad L_{new} = \frac{k_z L}{\omega_0}, \qquad C_{new} = \frac{C}{k_z\,\omega_0}$$

$k_z = 10000\ \Omega$, so the source and load resistors become $R_s = R_L$ = 10 kΩ.

Each grounded inductor is replaced by a GIC with $Z_4 = C$ and $R_1 = R_2 = R_3 = R_5 = R$, so $L = CR^2$ and $R = \sqrt{L/C}$.

Final circuit:

Vi o--[Rs]--[C1]-+----[C3]-+-------+----o Vo
                 |         |       |
              [GIC-L2]  [GIC-L4]  [RL]
GND ----------------------------------------

Answer: $R_s = R_L$ = 10 kΩ; series capacitors 8.166 nF and 3.382 nF; $L_2$ = 338.2 mH (GIC: C = 10 nF, R = 5.815 kΩ); $L_4$ = 816.6 mH (GIC: C = 10 nF, R = 9.036 kΩ); $\omega_0$ = 16,000 rad/s.