Guide bund with plan, section, nose; 2500 m3/s

Data and design basis

• Silt factor (Lacey): $f = 1.76\sqrt{d_{mm}} = 1.76\sqrt{0.1} = 0.557$
• Flood depth above bed: $h = 78.8 - 75.5 = 3.30$ m
• Design discharge for scour/apron: $Q = 2500$ m³/s

1. Waterway and length of guide bund

Lacey's regime waterway: $W = 4.75\sqrt{Q} = 4.75\sqrt{2500} = 237.50$ m. Adopt $W \approx 238$ m. Length of guide bund (Garg): upstream shank $=1.0$ to $1.5\,W$, downstream tail $=0.2$ to $0.5\,W$. Adopt

$$\begin{aligned} L_{us} &= 1.25W = 1.25\times 238 = 298\ \text{m} \\ L_{ds} &= 0.25W = 60\ \text{m} \end{aligned}$$

Curved heads: upstream radius $R_u \approx 0.5W = 119$ m with sweep $120^\circ$ to $145^\circ$ (adopt $120^\circ$); downstream radius $R_d \approx 0.25W = 60$ m with sweep about $45^\circ$. Arc length of upstream head $= R_u\theta = 119\times 2.094 = 249$ m, so total length on the upstream side $\approx 547$ m.

2. Thickness of stone pitching

$$t = 0.06\,Q^{1/3} = 0.06\times 2500^{1/3} = 0.06\times 13.57 = 0.81\ \text{m}$$

Adopt $t \approx 0.9$ m (pitching on the river side slope 2:1, over a 0.15 to 0.3 m graded filter).

3. Scour depth and launching apron

Lacey's normal scour depth:

$$R = 0.47\left(\frac{Q}{f}\right)^{1/3} = 0.47\left(\frac{2500}{0.557}\right)^{1/3} = 7.75\ \text{m}$$

Maximum scour below HFL: $2R$ at the upstream nose, $1.5R$ at the shank (straight portion). The apron must launch to the slope $2H:1V$, so its horizontal width is $1.5D'$ and, when launched, it covers a slope length $\sqrt5\,D'$ with thickness $1.5t$.

Thickness: pitching $t = 0.81$ m, so the launched apron thickness is $1.5t = 1.5\times0.81 = 1.22$ m. Equating volumes per metre, the thickness as laid over $1.5D'$ width is $T = \dfrac{1.5t\times\sqrt5 D'}{1.5D'} = \sqrt5\,t = 1.82$ m (about $2.25t$).

Summary

Sketches

Plan:

 U/S                                          D/S
                       bridge / weir axis
   Shank (straight)                |
 ________________________________  |  ___
/  1.0-1.5 W upstream            \ | /   \  tail
\________________________________/=|=\___/  0.25 W
 curved head                       |
 R, sweep 120 deg    <-- waterway W -->
 ________________________________  |  ___
/                                \ | /   \
\________________________________/=|=\___/

Section at the straight portion (shank):

           top width 6 m
         ___________  <- HFL + 1.5 m
        /           \
 HFL ---/-------------\---  2:1 slopes
       / pitching t    \
 bed__/__ filter ______ \___
      \_ launching apron _/ (launches at 2:1)

Section at the nose (upstream curved head):

 Section at u/s curved head (nose)
            ______  <- HFL + 1.5 m
           /      \   top 6 m, side 3:1 (flatter)
 HFL ----/---------\----
        / pitching t \
 bed ___/_____________\__
         \_ apron: 2.0R scour, 1.5D' wide _/